Welcome To b2b168.com, Join Free | Sign In
中文(简体) |
中文(繁體) |
Francés |Español |Deutsch |Pусский |
| No.13566791

- Product Categories
- Friendly Links
Information Name: | Supply Benxi City baghouse long bag pulse dust collector |
Published: | 2014-09-19 |
Validity: | 90 |
Specifications: | A112 |
Quantity: | 100.00 |
Price Description: | |
Detailed Product Description: | LCM LCM long pulse bag filter bag long pulse bag filter bag work process: the dust stream from the air inlet through the windshield into the dust filter chamber, removing a small portion of the windshield of the dust particles, most of the dust particles are filtered retention in the bag outside the bag, net gas in the bag up together in the box, discharged from the outlet. When the dust bag surface increases, the micro-controller signal output pressure, pulse controller will send a signal to the injection system working. At this point the compressed air ejected from the nozzle into the bag through the pulse tank and the injection tube on the expansion of the bag to produce a pulse at the same time under the effect of the reverse flow, the dust on the filter bag is peeled fall into the hopper. LCM long pulse bag filter bag main features: 1. Cleaning strength when cleaning bag wall was beside gravity than conventional flat bag filter insert high number of 10 times, was cleaning bag filter all the way in efforts to the biggest, the best kind. 2 low pressure injection system for the compressed air pressure of only 0.15 ~ 0.25MPa, which is due to electromagnetic pulse valve with a reasonable structure, reducing the energy consumption of the middle part of the injection process, and the pulse valves open and close rapidly, spray Blow short (only 65 ~ 85ms). Therefore, in the low injection pressure can be achieved very good results. 3 filtration rate high is next inserted flat bag filter 2 to 3 times. This is due to the cleaning effect, caused by the dust layer on the thin bag. 4 runs low energy consumption equipment resistance is not greater than 1200Pa, only next to the flat bag filter insert 1/2 to 1/3, and thus filtering low energy consumption; their injection pressure is low, less compressed air consumption, thus cleaning energy is low. 5 for bags convenient, simple maintenance bag without banding, relying elasticity rose flower ring embedded in the board, when changing bags, people took part in the clean gas side of the board, a brief contact with the dirt bag, good operating condition, pulse valve Only 15% of the general number of pulse jet bag filter, the diaphragm life for over a year, and thus the maintenance of small workload. [Shunxiang Environmental Protection Equipment Co., Ltd. to provide customers with the best quality service and products, we believe that only good quality can ultimately impress customers, price is only temporary, dear friends, identity and quality, so we have to take our quality started Brand! Look forward to your cooperation Tel: 15383375191 QQ: 2052680995 Name: Tian Website: http: //www.btsxhb88.com/shop/danji/ standalone pulse dust collector |
Admin>>>
You are the 5701 visitor
Copyright © GuangDong ICP No. 10089450, Botou Shunxiang Environmental Protection Equipment Co., Ltd. All rights reserved.
Technical support: ShenZhen AllWays Technology Development Co., Ltd.
AllSources Network's Disclaimer: The legitimacy of the enterprise information does not undertake any guarantee responsibility
You are the 5701 visitor
Copyright © GuangDong ICP No. 10089450, Botou Shunxiang Environmental Protection Equipment Co., Ltd. All rights reserved.
Technical support: ShenZhen AllWays Technology Development Co., Ltd.
AllSources Network's Disclaimer: The legitimacy of the enterprise information does not undertake any guarantee responsibility